Wooden slot sound - absorbing panels
Wooden slot sound - absorbing panels
Slot sound-absorbing panels, is the result of a number of experts after years of development, the successful development of advanced sound-absorbing panels, the sound-absorbing board not only has high-performance sound absorption effect, but also has outstanding decorative effect of the comprehensive effect, Density fibreboard and melamine, real wood, paint and other finishes made by a number of processes refined, sound absorption structure principle: - a kind of MDF in the front slotted, the back open hole structure of sound-absorbing material, by adjusting the material positive The structure of slotted back hole and the depth and volume of the cavity behind the sound-absorbing board can be changed by changing the width of the groove or the depth of the circular hole. Different sound absorption effects are obtained at different frequencies. Commonly used in gymnasiums, hotels, exhibition halls, school lecture halls, performing arts centers, conference rooms and other places.
Technical Parameters
1. Structure: substrate, finishes, back
2. Substrate: pottery aluminum plate, glass magnesium board, red glass magnesium board, red flame retardant board, medium density fiberboard, moisture board, bamboo board, common board
3. Finishes: melamine, natural veneer, paint
4. Back: black sound-absorbing stick
5. General specifications: 2440 * 192mm, 2440 * 128mm
6. Conventional thickness: 12/15 / 18mm
7. Conventional Slot Face: 13-13, 14-2, 28-4, 59-5
8. Sound absorption band: full-frequency absorption
9. Formaldehyde emission: According to GB18580-2001 "indoor decoration materials, wood-based panels and their products in the formaldehyde emission" test, formaldehyde emission of E1 level.
10. Fire rating: According to GB8624-2006 "Classification of building materials and products combustion performance" test, combustion performance of A1 / A2 level.
installation
.
(A) pre-installation preparation and installation requirements:
1. The installation site must be dry, the minimum temperature of not less than 10 degrees Celsius.
2. Installation site after the maximum humidity change should be controlled in the range of 40% to 60%.
3. The installation site must meet the humidity standards specified above at least 24 hours before installation.
4. Sound-absorbing panels must be placed in the installation site for 48 hours, so that the sound-absorbing panels to adapt to the indoor environment and stereotypes.
5. Sound-absorbing panels covered walls must be required by the design drawings or construction plans to install the keel, and keel for leveling treatment; keel arrangement of the rule must be and sound-absorbing panels arranged to adapt; keel should be lined grid Shape, spacing 300 ~ 600mm.
6. If the choice of wood keel, wood keel surface to the grass-roots distance in accordance with the specific requirements, generally 50mm. Wood keel edge smoothness and verticality error should not be greater than 0.5mm.
7. If the filler needs to be filled in the clearance of the keel, it should be installed and handled according to the design requirements, and ensure that the installation of the sound-absorbing panel is not affected.
(B) slot wood sound-absorbing panels in the slot wood sound-absorbing panels with keel fixed
1. The slot wood sound-absorbing panels with keel through the gun nail or threaded screw fixed to the keel, the formation of grid-like structure.
2. Along the slot wood sound-absorbing panels with keel into the fastener LY02, LY03, fastener to the width of the slot wood sound-absorbing panels, whichever is fixed slot wood sound-absorbing panels.
3 sound-absorbing panels installed in order to follow from left to right, from bottom to top principles.
4. If you need to fine-tune the location of the sound-absorbing panels, only need to adjust the cleat LY02, LY03.
(C) installation of the system
1. Light steel keel installation system
2. Wood keel installation system
Technical Parameters
1. Structure: substrate, finishes, back
2. Substrate: pottery aluminum plate, glass magnesium board, red glass magnesium board, red flame retardant board, medium density fiberboard, moisture board, bamboo board, common board
3. Finishes: melamine, natural veneer, paint
4. Back: black sound-absorbing stick
5. General specifications: 2440 * 192mm, 2440 * 128mm
6. Conventional thickness: 12/15 / 18mm
7. Conventional Slot Face: 13-13, 14-2, 28-4, 59-5
8. Sound absorption band: full-frequency absorption
9. Formaldehyde emission: According to GB18580-2001 "indoor decoration materials, wood-based panels and their products in the formaldehyde emission" test, formaldehyde emission of E1 level.
10. Fire rating: According to GB8624-2006 "Classification of building materials and products combustion performance" test, combustion performance of A1 / A2 level.
installation
.
(A) pre-installation preparation and installation requirements:
1. The installation site must be dry, the minimum temperature of not less than 10 degrees Celsius.
2. Installation site after the maximum humidity change should be controlled in the range of 40% to 60%.
3. The installation site must meet the humidity standards specified above at least 24 hours before installation.
4. Sound-absorbing panels must be placed in the installation site for 48 hours, so that the sound-absorbing panels to adapt to the indoor environment and stereotypes.
5. Sound-absorbing panels covered walls must be required by the design drawings or construction plans to install the keel, and keel for leveling treatment; keel arrangement of the rule must be and sound-absorbing panels arranged to adapt; keel should be lined grid Shape, spacing 300 ~ 600mm.
6. If the choice of wood keel, wood keel surface to the grass-roots distance in accordance with the specific requirements, generally 50mm. Wood keel edge smoothness and verticality error should not be greater than 0.5mm.
7. If the filler needs to be filled in the clearance of the keel, it should be installed and handled according to the design requirements, and ensure that the installation of the sound-absorbing panel is not affected.
(B) slot wood sound-absorbing panels in the slot wood sound-absorbing panels with keel fixed
1. The slot wood sound-absorbing panels with keel through the gun nail or threaded screw fixed to the keel, the formation of grid-like structure.
2. Along the slot wood sound-absorbing panels with keel into the fastener LY02, LY03, fastener to the width of the slot wood sound-absorbing panels, whichever is fixed slot wood sound-absorbing panels.
3 sound-absorbing panels installed in order to follow from left to right, from bottom to top principles.
4. If you need to fine-tune the location of the sound-absorbing panels, only need to adjust the cleat LY02, LY03.
(C) installation of the system
1. Light steel keel installation system
2. Wood keel installation system
